SmallBot
reconn's
reconn's
world
world
.com



Email Statistics | August 26, 2016
Schematics Depot >> Audio >> sound detector amp/electret mike amp

sound detector amp/electret mike amp:
sound detector amp/electret mike amp schematic
click here to enlarge schematic


parts:
U1LM741 op amp ic
R11 megohm resistor
R2, R36.8k ohm resistor
R41k ohm resistor
C1, C20.47uF ceramic capacitor
MIC1electret condenser microphone

all resistors are 5 or 10 percent tolerance, 1/4-watt
all capacitors are 10 percent tolerance,
rated 35 volts or higher
this circuit amplifies the output of a regular electret condensor microphone quite nicely.. adjust sensitivity by turning R1
Return to: Schematics Depot, or Audio Circuits


Site by Andrew Wilson. Copyright 1997-2006 All Rights Reserved unless otherwise noted.
Schematics in Schematics Depot were found on the internet and assumed to be in public domain. Contact webmaster if the copyright holder wants them pulled for any reason.