|
| |||||||||
|
Robotics Projects: Electronics Projects: Project Log: |
Tracking :
Reconn's World Forum
4 Transistor Tracking Transmitter
Posted by:
andrew ()
Date: June 26, 2003 09:54PM parts: Transmitter Parts: R1 100K resistor R2 10 ohm resistor R3 47K resistor R4 220 ohm resistor C1 4.7uf electrolytic capacitor C2 0.001uf disc capacitor C3 10 to 40pf trimmer capacitor C4 4.7pf disc capacitor C5 0.001uf disc capacitor Q1 2N3906 PNP transistor Q2, Q3, Q4 2N3904 NPN transistor L1 4-5 turns of 22 ga. magnet wire close wound around 1/8" non-conductive core Antenna 10-12" hookup wire Re: 4 Transistor Tracking Transmitter
Posted by:
kyle ()
Date: June 29, 2004 07:01PM what sort of range would you get out of this and would it be suitable in 155.fre I was looking for something to use for dog tracking. what sort of range is this??? Thanks Kyle Re: 4 Transistor Tracking Transmitter
Posted by:
Alan Hall ()
Date: December 21, 2005 05:44PM Hi! The cct. originally contained a comment "I don't know how it works, what you'd use it for, etc." I've just sent an e-mail off to answer these Qs. ~ and yours as well! Hope you get to read them / find them enlightening! |
||||||||